Version History
Here you can find the changelog of RF-Toolbox Pro since it was posted on our website on 2016-09-24.
The latest version is 14.5.01 and it was updated on soft112.com on 22 March, 2024.
See below the changes in each version:
version 14.5.01
posted on 2022-09-12
Sep 12, 2022
Version 14.5.01
This update includes the following changes and fixes:
◉ Further improvements for a next iOS Version
◉ Some bug fixes and improvements
◉ Several changes under the hood
Thanks for your great support and feedback which helps to further improve this App.
Please use the Contact Developer feature inside the App to contact me in case of questions or issues.
Stay safe and healthy!
Best regards,
Marcus
version 14.0.4
posted on 2020-12-07
Dec 7, 2020 Version 14.0.4
This update fixes a few remaining minor issues.
Best regards,
Marcus
version 14.0.3
posted on 2020-11-03
Nov 3, 2020 Version 14.0.3
This update fixes a remaining iOS 14 bug where some images were not displayed correctly.
Best regards,
Marcus
version 13.0.1
posted on 2019-11-26
Nov 26, 2019 Version 13.0.1
This update contains several changes and improvements:
■ Additional iOS 13 compatibility
- a new File and PDF Viewer has been implemented
- iOS 13 page sheets are now supported
- and several additional changes to support iOS 13 have been implemented
- The minimal iOS Version requirement is now 10
■ Bug fixes
- Bug fixes in the C-Plate tool
- Bug fix of the Components tool which could only opened once
- Due to the new PDF Reader, data-sheets will now rotate correctly
- Printing from inside the Database tools (e.g. Transistors) no work correctly
- A bug which prevents to import Online projects was fixed (basically an iOS 13 bug)
■ SamacSys tool
I found that this tool often was underestimated. It is indeed a very powerful tool to find information like specs, data sheet and pin out of literally any component. The tool is now called Comp. Search to better suit to it's purpose. I have also implemented some improvements to this tool.
■ Attenuator tool
This tool now also calculates backwards based on the selected E-Series
■ Tables tool
- 3D Printing Filament types added
- Power over Ethernet POW Classes added
■ Circuits diagrams
One of the larger improvements is the use of the internal Circuit drawing feature for the tool diagrams. This way, the circuits (e.g. for the OpAmp Tool) benefit from the following improvements:
- Improved drawing quality
- Resistors will now either be displayed in Zig-Zag US or IEEE Style (depending on the country setting)
- Where possible, the circuits now show the calculated component values inside the diagram
- All tools now offer Printing and PDF Exporting which also includes the circuit diagram
■ Circuit Editor
- New Setting: "Adjust board to fit" under (File -> Parameters) allows to change the board size to fit the whole circuit so you don't have to move components around if the board is too small.
- Circuits can now also be printed
■ Improved File Viewer, Print and export capabilities
Either from inside the tools or from inside the File Viewer, content like the Tool results can now be exported as PDF as local file or printed
■ Other improvements
- A new Tool SMPS for calculating Flyback Transformers for Switched Mode Power Supplies as been added
- Several images have been re-created in higher quality
- The Formula tool has also been improved
In case of questions, issues or suggestions, please use the Support button inside the App of the Form on the website.
Thank you so much for your support.
Please let others know if you like this App to keep it going.
Thank you so much!
Best Regards,
Marcus
version 9.3.1
posted on 2013-01-20
version 13.0.1
posted on 1970-01-01
2019年11月26日 Version 13.0.1
This update contains several changes and improvements:
■ Additional iOS 13 compatibility
- a new File and PDF Viewer has been implemented
- iOS 13 page sheets are now supported
- and several additional changes to support iOS 13 have been implemented
- The minimal iOS Version requirement is now 10
■ Bug fixes
- Bug fixes in the C-Plate tool
- Bug fix of the Components tool which could only opened once
- Due to the new PDF Reader, data-sheets will now rotate correctly
- Printing from inside the Database tools (e.g. Transistors) no work correctly
- A bug which prevents to import Online projects was fixed (basically an iOS 13 bug)
■ SamacSys tool
I found that this tool often was underestimated. It is indeed a very powerful tool to find information like specs, data sheet and pin out of literally any component. The tool is now called Comp. Search to better suit to it's purpose. I have also implemented some improvements to this tool.
■ Attenuator tool
This tool now also calculates backwards based on the selected E-Series
■ Tables tool
- 3D Printing Filament types added
- Power over Ethernet POW Classes added
■ Circuits diagrams
One of the larger improvements is the use of the internal Circuit drawing feature for the tool diagrams. This way, the circuits (e.g. for the OpAmp Tool) benefit from the following improvements:
- Improved drawing quality
- Resistors will now either be displayed in Zig-Zag US or IEEE Style (depending on the country setting)
- Where possible, the circuits now show the calculated component values inside the diagram
- All tools now offer Printing and PDF Exporting which also includes the circuit diagram
■ Circuit Editor
- New Setting: "Adjust board to fit" under (File -> Parameters) allows to change the board size to fit the whole circuit so you don't have to move components around if the board is too small.
- Circuits can now also be printed
■ Improved File Viewer, Print and export capabilities
Either from inside the tools or from inside the File Viewer, content like the Tool results can now be exported as PDF as local file or printed
■ Other improvements
- A new Tool SMPS for calculating Flyback Transformers for Switched Mode Power Supplies as been added
- Several images have been re-created in higher quality
- The Formula tool has also been improved
In case of questions, issues or suggestions, please use the Support button inside the App of the Form on the website.
Thank you so much for your support.
Please let others know if you like this App to keep it going.
Thank you so much!
Best Regards,
Marcus
version 13.0.1
posted on 1970-01-01
26 de nov. de 2019 Version 13.0.1
This update contains several changes and improvements:
■ Additional iOS 13 compatibility
- a new File and PDF Viewer has been implemented
- iOS 13 page sheets are now supported
- and several additional changes to support iOS 13 have been implemented
- The minimal iOS Version requirement is now 10
■ Bug fixes
- Bug fixes in the C-Plate tool
- Bug fix of the Components tool which could only opened once
- Due to the new PDF Reader, data-sheets will now rotate correctly
- Printing from inside the Database tools (e.g. Transistors) no work correctly
- A bug which prevents to import Online projects was fixed (basically an iOS 13 bug)
■ SamacSys tool
I found that this tool often was underestimated. It is indeed a very powerful tool to find information like specs, data sheet and pin out of literally any component. The tool is now called Comp. Search to better suit to it's purpose. I have also implemented some improvements to this tool.
■ Attenuator tool
This tool now also calculates backwards based on the selected E-Series
■ Tables tool
- 3D Printing Filament types added
- Power over Ethernet POW Classes added
■ Circuits diagrams
One of the larger improvements is the use of the internal Circuit drawing feature for the tool diagrams. This way, the circuits (e.g. for the OpAmp Tool) benefit from the following improvements:
- Improved drawing quality
- Resistors will now either be displayed in Zig-Zag US or IEEE Style (depending on the country setting)
- Where possible, the circuits now show the calculated component values inside the diagram
- All tools now offer Printing and PDF Exporting which also includes the circuit diagram
■ Circuit Editor
- New Setting: "Adjust board to fit" under (File -> Parameters) allows to change the board size to fit the whole circuit so you don't have to move components around if the board is too small.
- Circuits can now also be printed
■ Improved File Viewer, Print and export capabilities
Either from inside the tools or from inside the File Viewer, content like the Tool results can now be exported as PDF as local file or printed
■ Other improvements
- A new Tool SMPS for calculating Flyback Transformers for Switched Mode Power Supplies as been added
- Several images have been re-created in higher quality
- The Formula tool has also been improved
In case of questions, issues or suggestions, please use the Support button inside the App of the Form on the website.
Thank you so much for your support.
Please let others know if you like this App to keep it going.
Thank you so much!
Best Regards,
Marcus